Somebody posted plans / pics of a DIY camera mount back in July, and today I thought I would go out and buy the bits and have a go and making one. However, I did not anticipate not being able to find the the forum post.
So if anyone has those plans, please can they be posted again.
I have the photos saved, email me and I'll fire them over. super easy and works great on nautiques. wouldn't work on my malibu
2" pvc and a 2" pvc cap. drill a hole in the cap for a thumb screw that will screw into the bottom of a camera & use a bunch of washers, (forget the thread size, but its a standard IMP size for cameras)
If you have a moomba the pylon is tapered. Heat the pvc with a heat gun and it will form to the pylon and work. Might take a couple of tries before you get it right.